Partner Microsites

Andimedes

Based in Vilshofen, Germany Andimedes is a service and system consultancy focused on customer specific system, hardware, FPGA AND Software design and system integration for customers active in the test and measurement, communications and industrial & consumer electronics sectors.

Established in1998, Andimedes continues to specialise in analogue and digital signal processing and in FPGA/DSP/Microcontroller/PCB design, debugging and verification. United under its common qualified, professional and pragmatic business ethic, Andimedes offers a variety of customer engagement models spanning hourly based consultancy through project management to full-blown turnkey project solutions.

The Andimedes team recognises that every project is unique and requires fully coordinated processes. It welcomes every customer challenge and is proud of its reputation for its open communication and full transparency in its dealings with them as together they progress to the successful completion of projects.

ByteSnap

Founded in 2008 ByteSnap Design is a UK-based specialist embedded hardware and software design consultancy with a client list that spans the UK, Europe and US. The company offers clients a blend of embedded systems services spanning hardware design and engineering to the full range of software development and electronic design services for all Microsoft Windows Embedded and Windows Mobile operating systems..

ByteSnap Design offers ZigBee device design and development experience and expertise. The company’s own ZigBee wireless module  ZMM01 , which offers cost-effective metering and control using the ZigBee Smart Energy protocol, and supporting development kit ZDM001 is available elsewhere on Ismosys.com.

Bytesnap services include:

Software Development

• Windows Embedded Mobile Applications
• Windows Embedded/Windows Mobile BSP
• Desktop Application
• Embedded Firmware Development

Electronics Design

• Electronic Prototype Design
• Electronic Board Design
• FPGA Development
• Microcontroller Design
• Manufacturing Support

Modeling and Simulation

Experienced in designing hardware products from PDAs to digital audio mixers with multiple DSPs and software projects such as developing Windows CE BSPs to real-time video mixing applications for Windows Mobile ByteSnap Design is committed to delivering experienced and trusted support throughout the entire product life cycle, resulting the highest product quality. The company has been instrumental in getting products such as trakAxMobile and Energy Optimizers Plogg designed and market ready.

Cynove

Founded in 2000 and based in the heart of Paris, France, Cynove is a specialist in the implementation of video solutions, based around CMOS sensor technology which can be easily adapted to any USB 2.0 High Speed link or DSP specification.

Cynove's USB camera solution is similar to webcam but WITHOUT compression.  Cynove has developed the entire USB stack to enable easy image transfer to a PC.

Cynove products have been developed to run under WINDOWS 2000, WINDOWS XP, WINDOWS VISTA, Embedded XP and LINUX. Resolutions currently available range from a standard VGA version up to 5MPixels.

Disign Consultants

Disign Consultants is a London-based provider of innovative turnkey electronic and software development solutions. With an enviable track record in developing products for Pharmaceutical, Automotive, Consumer, Sports, Industrial Control and Medical applications, Disign Consultant’s expertise spans embedded product, RFID and PCB design through to turnkey manufacturing, system design / analysis, project management, product pipeline consulting and Windows software development.

Disign Consultant’s structured and regulated approach to product design, development and technology is proven to significantly improve its customers’ business processes and speed their latest products to market. The company develops leading edge technology used in a vast array of products the world over, but it focuses on the following

• Full Electronics & Software Product Design
• Medical Devices
• Consumer
• RFID – HF / UHF
• Industrial / Control & Automation
• Automotive
• Lighting / LED
• Primary Services
• M2M / B2B Web based data management solutions
• RF Development – Bluetooth / WiFi / Zigbee GSM / GPRS etc
• Turnkey Electronics / Software Design / Development
• Turnkey manufacturing / UK / Europe / Far East
• Turnkey CE Marking and Regulatory compliance management

Email: info@disignconsultants.com

Dynamiq Engineering

Experts in mechanical engineering analysis, design & development Dynamiq Engineering specialises in the analysis, design, research and development of high performance mechanical engineering products and systems

Dynamiq Engineering uses proprietary advanced engineering analysis and simulation techniques to solve the most complex of engineering problems. The expertise and experience amassed by the consultancy enables it to make a vital contribution to the success of companies tertiary to mainstream mechanical engineering, including those engaged in electronic, communication and system engineering.

Services provided by Dynamiq Engineering span new product development, research and technology programs and client specific engineering analysis to the provision of independent expertise for investors or insurers.

Email: sales@dynamiq-eng.co.uk

Phone: + 44 (0) 1889 580 085

Eolane 

Eolane Group offers a wide range of design services for professional electronic based products targeting a wide range of market segments including  aeronautic, automotive, defense, industrial, medical and telecoms.

A specialist in turnkey solutions Eolane also offers consultancy for specific projects. The company has a proud reputation for meeting and usually exceeding its customers’ expectations and requirements through preliminary studies, design optimisation to complete design of new product. The has all the necessary certifications including;  ISO/TS16949, OHSAS 18001, EN9100, AQAP 2110, ISO 13485. This allows Eolane to meet and exceed customers’ requirements and expectations.

Eolane, respectful of the environment, is also ISO 14001 certified.

The Eolane team comprises high skilled specialist engineers in project management, electronic design, embedded software and mechanical design who are able to offer complete product design and industrialisation services with all due regard to constraints on serial cost (DFC), manufacturing (DFM) and testing (DFT).

Email: enquiries@eolane.com 

Contact: +33 (0)2 4119 9054

eSilicon

eSilicon offers a wide range of value-added ASIC design and manufacturing services tailored to supplement its customers’ in-house capabilities. Its proprietary eSilicon Enterprise™ design infra-structure ensures higher performing ASICs and a faster time to market. The company has an enviable 100% timing closure success rate and a >95% first-time silicon success rate.

Netlist handoff solution
eSilicon’s Netlist handoff solution provides the highest degree of customer visibility and involvement: The customer manages the logic design and provides a netlist: eSilicon performs place and route and manages all the subsequent manufacturing operations including fabrication, packaging and test procedures, including; design for test (DFT), design for manufacturability (DFM) package design and simulation, processor subsystem design and implementation and signal integrity (SI) techniques.

HCELL Engineering

HCELL Engineering provides solutions and consulting services for safety-critical embedded-system applications targeting avionics, industrial and automotive markets. HCELL has established itself as a leading expert in the field of complex soft IP and custom design and development, according to design assurance guidance for airborne electronic hardware, RTCA DO-254 up to DAL A and targeting FPGA through their long term partnership with Altera and ASIC technologies.

HCELL is capable of delivering project designs across multiple technologies with specific expertise in: Avionics, Automotive, Security/ Encryption ( ie:bank transaction) and medical.

HCELL provides a full range of services from initial design engineering through to prototyping and where applicable can also manage & provide pre-production volumes.

Inverto

Inverto NV is a specialist in advanced technology electronic control systems in three main application areas: Renewable applications include high-voltage solar cell installations and hybrid motor drives; Inductive applications include the wireless transfer of power and wireless charging of heaters and lighting. Inverto’s expertise in Lighting applications ranges from domestic, through commercial to highly specialized, including photographic and 3D.

From its base near to Ghent in Belgium, Inverto’ services span Research & Development, Production Engineering and Manufacturing through a co-development partnership. The company offers flexible options for engagement that range from involvement at specific stages of the process through to delivery of an entire turnkey solution.

LS Research

LS Research offers a comprehensive portfolio of design services and is justifiably proud of the leadership position it maintains in the latest wireless technologies such as Wibree, Zigbee, Wireless USB, WiFi, Bluetooth, and UWB. Unusually for a wireless product design company LS Research sees its primary motivator as applying its technical innovation and engineering expertise to help clients take their business to the next level. With the experience of well over 300 customer radio designs, LS Research has contributed to the success of customers ranging from lowly startups to Fortune 500 companies.

Proven wireless product development experience At the heart of LS Research's innovative talent is the core RF engineering group with over 28 years of proven wireless product development experience. The project scope ranges from turnkey, specific design service support, integration, to product testing and certification.

LS Research's capabilities include; antenna design & test, embedded software & firmware, analog & digital design, DSP development, PC applications, CAD design, prototype Fabrication, Product Evaluation, Production support, pre-certification testing, ESD / Immunity testing and FCC / CE certification.

Competing with the AA for the title, The Forth emergency service MicroProcessor Engineering (MPE) is a UK based specialist real time and embedded system engineering consultancy. Leveraging more than twenty-five years top-level experience in the Forth programming language, MPE supports the entire development cycle with hardware, software and firmware tailored to support a large and varied range of embedded targets.

A specialised RF engineering consultancy based in Herkenbosch, Netherlands, Ropet RF Design provides innovative custom RF solutions to meet every customers’ unique and individual needs.

Available services include; RF/microwave consultancy by the hour or by the day, standard high performance RF modules or customization capabilities to suit end applications; expertise in RF semiconductors from most major manufacturers; antenna design and simulation; production of TCF Technical Construction files and management of compliance test and approval processes.

Based in Belgium, SkyLogic is a design and consultancy bureau, specialising in VHDL design for FPGAs. Its business strategy is to support the design flow from concept to realisation. SkyLogic’s engineering team has extensive hard- and soft-ware system design expertise together with data communication and data processing systems experience enabling the timely and cost-effective delivery of complete and fully verified FPGA-based solutions including boards, IP-cores and simulation environments.

Skylogic prides itself both in its ability to quickly integrate into the customer’s design team and its flexibility to work from a variety of project inputs spanning specification documents, behavioural models and even flat C-code.

For more information, please click on the links below or call

Xentech Solutions is a UK -based electronics design and engineering consultancy specialising in taking designs from concept through to volume manufacturing. With a focus on embedded systems development and a background in IP Networking and Datacoms, Xentech Solutions is able to provide the skills and capabilities necessary to complement a client's in-house team or to take on the entire development process.

Extensive experience of working with global OEMs and Far Eastern manufacturing partners enables Xentech Solutions to fully appreciate every aspect of the NPI process and to ensure that products are developed on time, on budget and to the highest possible standards. Xentech Solutions operates a highly flexible working model that maximises the efficiencies of outsourcing, releasing the client's own resources to focus on core IP generation.

For more information, please click click on any of the links below or call +44 (0)1727 867795 for an informal but confidential conversation.